Home Generator Size Calculator

Home Generator Size Calculator
Enter your numbers and calculate.
Estimates only. Have a licensed electrician verify sizing before purchase.

Why Generator Size Matters

A home generator that is too small for the load will stall, trip its breaker, or shut down exactly when you need it most, usually during a storm outage when the refrigerator, the well pump, and the air conditioner all try to run at once. Undersized equipment also strains its own engine, because it spends long periods at full throttle, which shortens its life and can cause voltage dips that harm sensitive electronics. Getting the size right is therefore not a luxury detail, it is the difference between a generator that quietly carries your home through an outage and one that becomes a source of frustration.

Oversizing has its own costs, and they are easy to overlook when shopping. A generator far larger than your load costs more to buy, burns more fuel even at light load, and may suffer from wet stacking or carbon buildup if it rarely works hard. The goal is a balanced size: enough capacity to start your largest motor and carry your essential circuits, with a modest safety margin for the unexpected, but not so much capacity that you pay for power you will never use.

Running Watts Versus Starting Watts

Every appliance has two wattage numbers, and confusing them is the most common sizing mistake. Running watts are what an appliance draws continuously while it operates, for example a refrigerator might draw 800 watts hour after hour. Starting watts, sometimes called surge watts, are the brief spike an electric motor draws in the first second or two after it switches on, and that spike can be two to three times the running draw. A generator must handle the running watts of everything on at once plus the starting surge of the largest motor that starts while the rest are already running.

This is why a simple sum of nameplate watts is not enough. If your air conditioner draws 2,500 watts while running but needs an extra 2,000 watts for a moment at startup, a generator sized only for running watts will bog down or trip the instant the compressor kicks in. The calculator on this page therefore adds the largest extra starting surge on top of the total running load, then applies your chosen safety margin, which mirrors how electricians actually size standby units.

  • Typical running watts: refrigerator 800, freezer 700, furnace fan 800, well pump 1,000, sump pump 900, window air conditioner 1,200, central air conditioner 2,500, lights and small electronics 1,200
  • Typical extra starting surge: refrigerator 1,200, well pump 2,000, central air conditioner 2,000 to 4,500, sump pump 1,500
  • Always check the nameplate on your own equipment, because real values vary by model, age, and efficiency

Worked Example

Consider a home with a refrigerator drawing 800 watts, a central air conditioner drawing 2,500 watts, a well pump drawing 1,000 watts, a furnace fan drawing 800 watts, and lights and other small loads drawing 1,200 watts. The total running load is 6,300 watts. The air conditioner is the largest motor, and it needs an extra 2,000 watts for a moment at startup, so the peak demand is 8,300 watts.

Applying a 20 percent safety margin gives 9,960 watts, which is 9.96 kilowatts. Generators are sold in whole kilowatt sizes, so this home should look at a 10 kilowatt unit. That size carries the whole essential load, starts the air conditioner without strain, and leaves a small reserve for a forgotten light or a phone charger, without jumping to a much larger and thirstier machine.

Reading Your Results

The calculator reports five numbers, and each one answers a different question. Total running watts tells you the steady load your home presents. Peak with starting surge tells you the worst moment the generator must survive. Required size with margin is the honest engineering answer, and the recommended size rounds that answer up to the next whole kilowatt, because generators are not sold in fractions.

Two further distinctions matter when you shop. Kilowatts measure real power, while kilovolt-amps measure apparent power, and for home loads the two are close but not identical, so compare the kilowatt rating when you can. Also check whether a rating is continuous or peak, because a generator advertised at a peak figure can only sustain that output for a few seconds, while its continuous rating is what it can carry all evening.

Common Sizing Mistakes

The first mistake is adding every appliance in the house as if all of them run at once. In a real outage you run essentials, not the electric dryer, the oven, and the air conditioner simultaneously, and sizing for everything at once can double the answer and the price. The second mistake is the opposite: forgetting starting watts entirely and buying a unit that trips every time a motor starts. Both errors come from the same root, which is guessing instead of listing loads.

A third mistake is skipping the safety margin. Nameplate watts are estimates, motors age, and on a hot day an air conditioner draws more than it does in mild weather. A margin of 15 to 25 percent absorbs those realities. A fourth mistake is reading only the headline rating on the box and missing that it is a peak figure, not a continuous one, which leaves the generator overloaded the moment the load settles.

  • Sizing for every appliance at once instead of essential circuits
  • Forgetting the starting surge of the largest motor
  • Skipping the safety margin for hot weather and aging motors
  • Comparing a peak rating on one model with a continuous rating on another

Practical Tips Before You Buy

Start by listing the circuits you truly need during an outage, usually refrigeration, a heating or cooling fan, the well or sump pump, some lights, and communications. Price that essential list first, then decide whether you want to add comfort loads like a second air conditioner or an electric range, and size for the larger list only if the budget allows. Load management devices can also help, because they shed a non-essential load for a few seconds while a motor starts, which can let a smaller generator do a bigger job.

Have a licensed electrician review the result before you buy, especially for a permanently installed standby unit, because transfer switches, fuel supply, and local codes all affect the final choice. Portable generators need manual connection discipline, while standby units switch automatically but cost more and need professional installation. Either way, keep the generator outdoors in a ventilated spot, store fuel safely, and exercise the unit regularly so it starts when the lights go out.

Portable Versus Standby Generators

Portable generators are the budget entry point, typically offering 7 to 12 kilowatts, running on gasoline, and requiring you to wheel the unit outside, start it manually, and connect loads with extension cords or a manual transfer switch. They are affordable and flexible, and one unit can serve a home, a job site, or a campsite, but they demand your attention during a storm, need frequent refueling, and are loud enough that neighbors will notice. For many households, a portable unit sized for essentials is the rational choice, especially where outages are short and infrequent.

Standby generators are the opposite bargain: permanently installed, connected to natural gas or a large propane tank, and switched automatically within seconds of an outage, even if you are away from home. They typically range from 10 to 25 kilowatts, exercise themselves weekly, and run quietly under a weatherproof enclosure, but they cost several times more installed, require permits and professional work, and need regular maintenance contracts. The calculator result applies to both types, but the interpretation differs, because a standby buyer often sizes for the whole house while a portable buyer sizes for essentials only.

Fuel planning separates the two types further. Gasoline degrades in storage within months unless treated, and a portable unit at half load may burn through a tank in eight to twelve hours, which means storm refueling trips in bad weather. Propane stores indefinitely and a large tank can run a standby unit for days, while natural gas is effectively unlimited as long as the utility supply holds, which it usually does even when the electric grid fails. Size the fuel plan with the same care as the electrical size, because a generator without fuel is just a heavy box.

Noise and placement also deserve thought before purchase. Portable units are loud, often above 70 decibels at full load, and must sit outdoors away from windows and air intakes because of carbon monoxide risk. Standby units are quieter and purpose-built for placement beside the house, but they still need clearance, airflow, and distance from bedrooms. Check local noise rules and setback requirements early, since a unit that cannot legally sit where you planned it is a problem best discovered before delivery, not after.

Sizing for Outages That Last Days

A generator sized for a few hours behaves differently during a multi-day outage, and the planning should reflect that. Fuel becomes the binding constraint long before electrical capacity does, because a portable unit at half load can empty its tank in under twelve hours, and refueling during a storm may be impossible if roads are closed or stations are dark. For outages measured in days, size the fuel reserve first: stored gasoline with stabilizer, a large propane tank, or a natural gas connection, and a realistic burn rate at your actual load, not the brochure figure at quarter load. Rotating loads also extends endurance dramatically, since running the air conditioner for an hour, then the well pump, then the water heater, in sequence rather than simultaneously, can cut the required generator size and stretch fuel by a third or more. A battery bank paired with a small generator is another endurance strategy, because the battery carries quiet overnight loads and the generator runs only a few efficient hours a day to recharge it, which saves fuel, reduces noise complaints, and gives the engine rest.

Fuel choice also affects sizing in practice, because gasoline, propane, and natural gas versions of the same generator often have slightly different ratings. Propane and natural gas models typically produce a little less power than their gasoline counterparts, so check the rating for the fuel you will actually use, not just the headline figure on the box.

Altitude and temperature derate generators too, since thin hot air reduces engine output. A unit rated at sea level may deliver several percent less on a mountain or during a heat wave, which is another reason the safety margin matters and why homes in high or hot locations should size a little more generously.

Frequently Asked Questions

What size generator do I need for a house?

Most homes need between 7 and 20 kilowatts for essential circuits, and the exact answer depends on your appliances, your largest motor, and whether you run air conditioning. List your running watts, add the largest starting surge, apply a safety margin, and round up to the next whole kilowatt.

How many watts does a refrigerator use?

A typical refrigerator draws around 800 running watts and needs roughly 1,200 extra watts for a moment at startup. Older or larger models draw more, so check the nameplate or manual for your exact unit before sizing.

What are starting watts?

Starting watts are the brief surge an electric motor draws when it first switches on, often two to three times its running watts. A generator must survive that surge while carrying everything else that is already running.

Why does my air conditioner need extra watts at startup?

An air conditioner compressor is a large motor, and motors draw a heavy inrush current until they reach full speed. That inrush is why central air conditioners often need 2,000 to 4,500 extra watts for a second or two.

What is the difference between kW and kVA?

Kilowatts measure real power that does useful work, while kilovolt-amps measure apparent power including reactive current. For typical home loads the numbers are close, but always compare kilowatt ratings when shopping.

Should I add a safety margin?

Yes, a margin of 15 to 25 percent is wise. Nameplate figures are estimates, motors age, and hot weather raises air conditioner draw, so the margin keeps the generator from running at its absolute limit.

Can an undersized generator damage my appliances?

Yes, an overloaded generator can sag in voltage and frequency, which stresses motors and electronics and can trip breakers or stall the engine. Repeated overloads shorten the life of both the generator and the appliances.

Is a bigger generator always better?

No, a far oversized generator costs more, burns more fuel at light load, and can develop carbon buildup from running too cool. The best size is the smallest unit that comfortably starts your largest motor and carries your essentials.

Do I need to run everything at once?

No, and sizing as if you do is a common and expensive mistake. Size for the essential circuits you will actually run together during an outage, and use load management if you want to add comfort loads.

How do I find the wattage of an appliance?

Check the nameplate on the appliance, the manual, or the manufacturer website for running watts and, for motors, locked-rotor or starting watts. If only amps and volts are listed, multiply them to estimate watts.

What size generator runs a well pump?

A typical well pump draws about 1,000 running watts and needs roughly 2,000 extra watts at startup, so allow about 3,000 watts for the pump alone within your total, plus everything else running at the same time.

Does a furnace fan need starting watts?

Yes, a furnace blower is a motor, so it needs a starting surge above its running watts, typically several hundred watts extra. Include that surge if the furnace fan is your largest motor.

What is a transfer switch and do I need one?

A transfer switch safely connects a generator to your home wiring and prevents backfeeding the grid, which can endanger utility workers. Standby units use automatic switches, while portable units use manual switches or extension cords for selected appliances.

How does load management reduce generator size?

Load management briefly sheds a non-essential load, such as a water heater, for a few seconds while a large motor starts. That shaves the peak demand, so a smaller generator can handle a load that would otherwise trip it.

Should I ask an electrician before buying?

Yes, especially for a standby unit. An electrician verifies your load list, transfer switch, fuel supply, and local code requirements, and can confirm that the size you calculated matches how your home is actually wired.